Tds monitor is a device for measuring particles dissolved solids in water that is not visible to the eye.
tds stands for total dissolved solids. Each water always contains dissolved particles that are not visible to the eye,
can form solid particles (such as metal content such as iron, aluminum, copper, manganese, etc.)
as well as non-solid particles such as micro-organisms etc. One way to measure it is to use a tool called tds meter.
This tool can measure how the amount of dissolved solids therein in ppm (mg / l) shown in the form of a digital number in display systems.
The way the device works is by dipping into the water to be measured (approx depth of 5cm) and automatically measure the tool works.
At the time of the first dipped number shown on the display remains fluid, wait approximately 2 to 3 minutes until a stable digital number.
Tds meter is used as a tool check the purity of water and mineral content that is ideal for all applications of water purification such as checking refill drinking water, reverse osmosis water, water pam, distilled water, battery water, groundwater, wastewater regulation, hard water, cultivation hydroponics, and colloidal silver. Features tds digital meter laboratory are as follows:
- Highly efficient and accurate due to using microprocessors.
- Hold function: to save measurements, for reading and recording.
- Fumsi auto-off: the meter shuts off automatically after 10 minutes of no use to conserve battery life.
- Measuring range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000-9990 ppm, the resolution is in increments of 10ppm, indicated by flashing images 'x10'.
- Built-in digital thermometer
- A large display and easy to read LCD screen.
- Calibration manufacturer: Our tool is calibrated with 342 ppm NaCl solution. Meters can be recalibrated with a mini screwdriver.