Toray
HFU-2020AN
Product
Datasheet
Pressurized
Outside to in / Dead-end Filtration Ultrafiltration (UF) Membrane Module
Toray’s PVDF membrane
construction is highly resistant to chlorine and strong acids, which allows for
better cleaning and optimization of filtration flux rates after cleaning. The
hollow fiber modules effectively remove suspended solids, viruses, and bacteria
and are certified for drinking water applications.
Membrane Characteristics Unit
Membrane
Material PVDF (Polyvinylidene fluoride)
Nominal Pore Size µm 0.01
Outer Membrane Surface
Area m2
(ft2) 72
(775)
Operating Parameters Unit Value
Maximum feed water /
Filtrate flow m3/h
(gpm) 12 (53)
Maximum backwash flow m3/h
(gpm) 13.5 (59)
Maximum air flow Nm3/h
(scfm) 9.0 (5.3)
Maximum inlet pressure kPa
(psi) 300 (43.5)
Maximum backwash
pressure kPa
(psi) 300 (43.5)
Normal Operating transmembrane
pressure kPa (psi) 0-200 (0-29)
Operating temperature
range °C
(°F) 0-40 (32-104)
During Filtration 1-10
pH Range
During
Cleaning 0-12
Product Certifications
and Compliances
·
NSF/ANSI 61 for drinking water
applications
·
NSF/ANSI 419 to comply with the U.S.
EPA’s long term 2 enhanced surface water treatment rule (LT2ESWTR), which allows
membrane manufacturers to prove crystosporidium reduction.
·
Association of membrane separation
technology of Japan
Applications
Drinking water,
industrial process water, pretreatment for seawater RO desalination, secondary,
and tertiary wastewater.
Product
Datasheet
HFU-2020AN
Pressuriezed
Outside to in / Dead-end filtration ultrafiltration (UF) membrane module
Dimensi dan Berat Satuan Value
Diameter mm
(in) 216 (8.5)
Length mm (ft) 2,160 (7.087)
Full of water kg (lbs) 92
(203)
Weight
After Draining kg (lbs) 49 (108)