AUTOMATIC WATER LEVEL CONTROL
Automatic water level control selling used to keep the water level inside the tandon or toren.
The Workings Of An Automatic Water Level Control
Tank water or shelter often called toren tandon or very commonly used in housing, in the plant or in the Office. Its function is quite vital as a reserve pool of ready waterbe used for daily needs, especially if there is a problem with the supply of the water pump or because of a power outage. The other advantage is also in the side of saving electricity because water pumps don't often start-stop in short intervals while water consumption takes place.
Generally water toren is controlled automatically by a management mechanism that will fill the air when the volume of water live a little and stop it when it is full. Quite a hassle when the control pengisian water is performed manually by the operator. Because in addition to having to wait a long time until the water began to rise until it came out on tap water, well water that is full of potentially wasted due to operator forgot to turn off the water pump.
Water tank with Level Control Switch
Level Control Switch
Like this picture, the system level switches have a way of working is quite simple. When the water reaches half of the lower ballast (low level) then two pembclosely (sinker) will hang where the total severity will be able to pull the switch on the switch body at the top. Switches that are interested will make contact relay ballast became close and electric current will flow through the cable to the machine the water pump then start and fill water into the high level until it reaches the toren.
When the water level is high, then approached the ballast the bottom will float and when the water level reaches the upper half of the ballast then level switchesgoing back to the initial position (with the help of a spring that is present in the switch body) so the relay contacts will be open and the electric current is cut off so that the engine water pump stops automatically.