sql
Pentair hardness test kit Water hardness test kit
Pentair hardness test kit Water hardness test kit
Hover to Zoom

Last Updated
14 Jun 2021
Minimum Order
1 unit
Subcategory
Elektrolisa

Specification of Pentair hardness test kit Water hardness test kit

Sell ​​Pentair hardness test kit to test water hardness

The Air Hardness Test will allow you to determine the amount of hardness in the pond water and make up water in just a few minutes.

Water that is really soft without violence is not desirable in the pool, because water tends to be corrosive. The recommended minimum value is about 80 ppm.

If the level of water hardness in the pool is low, use calcium chloride dihydrate to increase the hardness. Every 1 ¼ lbs. From this material is added to 10,000 gallons of water, which increases hardness up to 10 ppm. This material is a weak acid. Be sure to dissolve the calcium chloride dihydrate in water before adding to the pond. Check the pH of the pool after the addition.

If the water used to fill the pond has excessive water hardness, it may be beneficial to pass 70-80% water through the filter softener before adding it to the pond.

However, if there is any metal contamination in water, (i, e) Copper, nickel or manganese) the solution is slowly approaching purple with each addition of the solution and never be blue. This may be an indication of the corrosive conditions in the pool due to water imbalance or improper acid addition. When this happens, the condition must be corrected. Contact your local pool equipment dealer for further assistance. Repeat the later hardness test when metal contamination is eliminated.

 

Untuk keterangan lebih lanjut, silahkan download PDF ini :

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Request a Quote
Produk Siap di Pesan
Rp 0
1
Bendera Indonesia Indonesia  |  Bendera Inggris English
Logo IDT
Chatbot