Specification of Pleated Filter Catridge Max Flow
Pleated Filter Catridge Max Flow
Description
The Max-Flow High Flow filter is suited for
applications such as cooling water, Pre-RO , and resin trap filtration.
It is a large diameter, coreless, single
open-ended pleated cartridge with an inside to outside flow. Puts an extraordinary
amount of surface area into a single cartridge.
Specification
Micron Rating : 1 , 5 , 10 , 25 , 50 , 75
µm
Material of Construction :
Filter Medium : Pleated Polypropylene depth
structure
Support and drainage : Polypropylene End
caps Polypropylene Outer Diameter : 152.4mm ( 6 inches )
Inner Diameter : 80mm ( 3.2 inches )
Length : 508mm ( 20 inches ) , 1016mm ( 40
inches ) , 1524mm ( 60 inches)
O - Ring EPDM ( Standard ) , Viton ,
Silicone , PEA encapsulated Viton
Operation Conditions
Maximum operating forward pressure drop :
3.5bar ( 50 psi ) at 25 ° C ( 77 ° F )
Maximum operating temperature : 80 ° C (
176 ° F )
Benefits and Features
High dirt loading capacity for long service
time and lower cost filtration.
Up to forty conventional depth filters
minimize initial cost Inside to outside flow configuration all contaminants
held within the single ended filter
Shorter in down time for element
replacement
Smaller equipment footprint
Coreless construction minimizes disposal
cost
Applications of product
RO Pre - Filtration
UF Membrane Pre - Filtration
Cooling water filtration
Pre filters or Final filters for waste
water