Specification of The salt tank or brine tank
Brine Tank is a tank regeneration that serves to put the media regeneran that will be linked to the main tank contains a resin. Contact: 081234590404
Brine tank should be filled with media regeneran NaCl main tank when using cation resin filter media. Otherwise brine tank should be filled with media regeneran NaOH when the main tank using anion resin filter media.
To prepare brine tank tube is a follows:
1. Insert the pedestal berlubang points and install the 4 plastic cups. Then attach the long tube place the buoy into the hole of the base available.
2. Enter the salt (regeneran media) to a pedestal above without any salt of influent to the tube float. If the amount of salt (regeneran media) a little bit (i.e. 1 kg) then prioritize media regeneran fit into the 4 plastic cups available so as not to spread or get into the hole points.
3. install 3/8 "hose to the tube last yg the other end terhuBung on the tube of resin. And attach the hose to the wastewater on the tube of resin.
4. install the pipe inlet and outlet tubes on the resin. Then the module water softener is ready to use.